\شماره٪٪۱
Kyriakides, S. and Corona, E. ``Mechanics of offshore pipelines:
volume 1: Buckling and collapse'', Elsevier, 1st Edition (2007).
\شماره٪٪۲
Autrique, R. and Rodal, E. ``Experimental verification of steel
pipe collapse under vacuum pressure conditions'', {\it In IOP Conference
Series: Earth and Environmental Science}, {\bf 49}(5), pp.1-10 (2016).
\شماره٪٪۳
Timoshenko, S.P. and Gere, J.M. ``Theory of elastic stability'',
McGraw-Hill Publishing Co., New York (1961).
\شماره٪٪۴
Von Karman, Th. and Tsien, H.-Sh. ``The buckling of thin cylindrical
shells under axial compression'', {\it Journal of the Aeronautical
Sciences}, {\bf 8}(8), pp. 303-312 (1941).
\شماره٪٪۵
Donnell, L.H. ``A new theory for the buckling of thin cylinders
under axial compression and bending'', Guggenheim Aeronautical
Laboratory (1934).
\شماره٪٪۶
Von Karman, Th., Dunn, L.G. and et al. ``The influence
of curvature on the buckling characteristics of structures'', {\it Journal
of the Aeronautical Sciences}, {\bf 7}(7), pp. 276-289 (1940).
\شماره٪٪۷
Allan, T. ``Experimental and analytical investigation of the
behaviour of cylindrical tubes subject to axial compressive forces'',
{\it Journal of Mechanical Engineering Science}, {\bf 10}(2), pp. 182-197
(1968).
\شماره٪٪۸
Ghani, E. ``Static and dynamic collapse behaviour of cylindrical
tubes and tube assemblies'', PhD Dissertion, University of London
(1982).
\شماره٪٪۹
Andrews, K.R.F., England, G.L. and Ghani, E. ``Classification
of the axial collapse of cylindrical tubes under quasi-static
loading'', {\it International Journal of Mechanical Sciences}, {\bf 25}(9-10),
pp. 687-696 (1983).
\شماره٪٪۱۰
Von Mises, R. and Windenburg, D.F. ``The critical external
pressure of cylindrical tubes under uniform radial and axial
load'', {\it David Taylor Model Basin}, Washington D.C. (1933).
\شماره٪٪۱۱
Windenburg, D.F. and Trilling, Ch. ``Collapse by instability
of thin cylindrical shells under external pressure'', {\it Transactions
of the American Society of Mechanical Engineers}, {\bf 11}, pp. 819-825
(1934).
\شماره٪٪۱۲
Ross, C., Little, A., Short, D. and Brown, G. ``Inelastic
buckling of geometrically imperfect tubes under external hydrostatic
pressure'', {\it Journal of Ocean Technology}, {\bf 3}(1), pp. 75-90 (2008).
\شماره٪٪۱۳
Zhou, Zh.J., Wang, Zh. and Xia, Y.M. ``Lifting pipeline buckling
under external pressure Base on imperfect reason'', {\it Advanced Materials
Research}, {\bf 337}, pp. 789-794 (2011).
\شماره٪٪۱۴
Mistry, J., Gibson, A.G. and Wu, Y.-S. ``Failure of composite
cylinders under combined external pressure and axial loadin'',
{\it Composite Structures}, {\bf 22}(4), pp. 193-200 (1992).
\شماره٪٪۱۵
Karamanos, S.A. and Eleftheriadis, Ch. ``Collapse of pressurized
elastoplastic tubular members under lateral loads'', {\it International
Journal of Mechanical Sciences}, {\bf 46}(1), pp. 35-56 (2004).
\شماره٪٪۱۶
Ghanbari Ghazijahani, T. and Showkati, H. ``Experiments on
cylindrical shells under pure bending and external pressure'',
{\it Journal of Constructional Steel Research}, {\bf 88}, pp. 109-122 (2013).
\شماره٪٪۱۷
Gong, Sh., Hu, Q., Bao, Sh. and et al. ``Asymmetric buckling
of offshore pipelines under combined tension, bending and external
pressure'', {\it Ships and Offshore Structures}, {\bf 10}(2), pp. 162-175
(2015).
\شماره٪٪۱۸
Tu, Sh. and Shuai, J. ``Numerical study on the buckling of
pressurized pipe under eccentric axial compression'', {\it Thin-Walled
Structures}, {\bf 147}, pp.1-10 (2020).
\شماره٪٪۱۹
Eyvazinejad Firouzsalari, S., Showkati, H. and Ingham, J.M. ``Free-spanning
and base-supported tubes subjected to combined axial compression
and indentation loads'', {\it Journal of Constructional Steel Research},
{\bf 161}, pp. 341-354 (2019).
\شماره٪٪۲۰
Standard, DNV Offshore, ``DNV-OS-F101'', Submarine Pipeline
Systems, Det Norske Veritas (2000).
\شماره٪٪۲۱
Murray, D.W. ``Local buckling, strain localization, wrinkling
and postbuckling response of line pipe'', {\it Engineering Structures},
{\bf 19}(5),
pp. 360-371 (1997).
\شماره٪٪۲۲
Mohareb, M., Kulak, G.L., Elwi, A. and et al. ``Testing
and analysis of steel pipe segments'', {\it Journal of Transportation
Engineering}, {\bf 127}(5), pp. 408-417 (2001).
\شماره٪٪۲۳
Strum, R.G. and O'Brien, H.I. ``Computing strength of vessels
subjected to external pressure'', {\it Transactions}, {\bf 69}, pp.
353-358 (1947).
\شماره٪٪۲۴
Pinna, R. and Ronalds, B.F. ``Hydrostatic buckling of shells
with various boundary conditions'', {\it J. Constr. Steel Res}, {\bf 56},
pp. 1-16 (2000).
\شماره٪٪۲۵
Salahshour, S. and Fallah, F. ``Elastic collapse of thin long
cylindrical shells under external pressure'', {\it Thin-Walled Structures},
{\bf 124}, pp. 81-87 (2018).
\شماره٪٪۲۶
ASTM, I. ``Standard test methods For tension testing of metallic
materials Designation: E8/E8m-09'', Universidad Del Valle, Pennsylvania
(2010).
\شماره٪٪۲۷
Zhou, Z. and Murray, D. ``Analysis of postbuckling behavior
of line pipe subjected to combined loads'', {\it Int. J. Solids Struct},
{\bf 32}(20), pp. 3015-3036 (1995).
\شماره٪٪۲۸
Zimmerman, T., Timms, C., Xie, J. and et al. ``Buckling
resistance of large diameter spiral welded linepipe'', {\it in 2004
International Pipeline Conference, American Society of Mechanical
Engineers}, pp. 365-373 (2004).
\شماره٪٪۲۹
Zhao, O., Gardner, L. and Young, B. ``Buckling of ferritic
stainless steel members under combined axial compression and
bending'', {\it J. Constr. Steel Res}, {\bf 117}, pp. 35-48 (2016).
\شماره٪٪۳۰
Zhao, O., Gardner, L. and Young, B. ``Structural performance
of stainless steel circular hollow sections under combined axial
load and bending-part 1: experiments and numerical modelling'',
{\it Thin-Walled Struct}, {\bf 101}, pp. 231-239 (2016).
\شماره٪٪۳۱
Bardi, F., Kyriakides, S. and Yun, H. ``Plastic buckling of
circular tubes under axialcompression. part ii: Analysis'', {\it Int.
J. Mech. Sci}, {\bf 48}(8), pp. 842-854 (2006).
\شماره٪٪۳۲
Zhao, O., Gardner, L. and Young, B. ``Structural performance
of stainless steel circular hollow sections under combined axial
load and bending--part 2: Parametric studies and design'', {\it Thin-Walled
Struct}, {\bf 101}, pp. 240-248 (2016).
\شماره٪٪۳۳
Zhao, O., Gardner, L. and Young, B. ``Behaviour of structural
stainless steel cross-sections under combined loading-part ii:
Numerical modelling and design approach'', {\it Eng. Struct}, {\bf 89}, pp.
247-259 (2015).
\شماره٪٪۳۴
Kainat, M., Lin, M., Cheng, J.R. and et al.
``Effects of the initial geometric imperfections on the buckling
behavior of high-strength uoe manufactured steel pipes'', {\it Press.
Vessel Technol}, {\bf 138}(5), pp.1-15 (2016).
\شماره٪٪۳۵
Kainat, M., Adeeb, S., Cheng, J.R. and et al.
``Identifying initial imperfection patterns of energy pipes
using a 3d laser scanner'', {\it in 9th International Pipeline Conference,
American Society of Mechanical Engineers}, pp. 57-63 (2012).
\شماره٪٪۳۶
Kainat, M., Cheng, J.R., Martens, M. and et al. ``Measurement
and characterization of the initial geometric imperfections in
high strength u-ing, o-ing and expanding manufactured steel pipes'',
{\it J. Press. Vessel Technol}, {\bf 138}(2), pp.1-11 (2016).
\شماره٪٪۳۷
Timoshenko, S.P. and Gere, J.M. ``Theory of elastic stability'',
Mineola (2009).
)