Author Index

A

  • Adelkhani, H. ELECTROPLATING OF Fe-Ni-Cr ALLOY WITH PULSE CURRENT [vol. 17, NO. 20, 2002, Pages 78-83]
  • Afshar, A. THE PRODUCTION OF MAGNESIUM ANODES AND ITS APPLICATION IN CATHODIC PROTECTION [vol. 17, No . 19, 2001, Pages 50-56]
  • Alemzadeh, I. CHARACTERISTICS AND APPLICATION OF BIOSURFACTANTS [vol. 17, NO. 20, 2002, Pages 50-53]
  • AmirShahKarami, S. A. WELD-INDUCED RESIDUAL STRESSES BASEED ON SOLIDITY OF MOVING MOLTEN [vol. 17, No . 19, 2001, Pages 11-16]
  • Arshadi, M.R. ELECTROPLATING OF Fe-Ni-Cr ALLOY WITH PULSE CURRENT [vol. 17, NO. 20, 2002, Pages 78-83]

B

  • Barzinnpour, Farnaz EVALUATION OF FLEXIBLE MANUFACTURING SYSTEMS: USING NON-MONETARY GROUP DECISION MAKING [vol. 17, No . 19, 2001, Pages 70-80]

D

  • Davari, A.R AN EXPERIMENTAL STUDY OF THE WORTEX STRUCTURE OVER DELTA WINGS [vol. 17, No . 19, 2001, Pages 3-10]
  • Dolati, A. THE ELECTRODEPOSITION OF QUAT-ERNARY FE-CR_NI-MO ALLOYS [vol. 17, NO. 20, 2002, Pages 32-35]

E

  • Ehsan, M. A FEASIBILITY STUDY TO SUPPLY DISTRIBUTED LOADS ALONG HIGH VOLTAGE TRANSMISSION LINE [vol. 17, NO. 20, 2002, Pages 3-7]
  • Eshraghnia Jahromi, A. SYSTEMATIC APPROACH FOR ANALYSIS OF UNIVERSITY-INDUSTRY RELATION IN IRAN [vol. 17, NO. 20, 2002, Pages 54-61]

F

  • Famil Samavati, F. MULTIRESOLUTION OF SURFACES WITH ARBITRARY TOPOLOGIES USING A REVERSE DOO SUBDIVISION SCHEME [vol. 17, NO. 20, 2002, Pages 70-77]

G

  • Ghorbani, M. THE ELECTRODEPOSITION OF QUAT-ERNARY FE-CR_NI-MO ALLOYS [vol. 17, NO. 20, 2002, Pages 32-35]

H

  • Haeri, S. M. STEADY STATE CHARACTERISTICS OF SANDY AND LIQUEFACTION EVALUATION OF THE AREA USING THIS CONCEPT [vol. 17, NO. 20, 2002, Pages 36-45]
  • Hamed, M. A. INTERLAMINAR STRESS ANALYSIS IN A ROTATING COMPOSITE BEAM [vol. 17, NO. 20, 2002, Pages 24-31]
  • Hamidi, A. STEADY STATE CHARACTERISTICS OF SANDY AND LIQUEFACTION EVALUATION OF THE AREA USING THIS CONCEPT [vol. 17, NO. 20, 2002, Pages 36-45]
  • Hashemian, J. COLOR REMOVAL OF MOLASSE EFFLUENT BY WETLAND WITH FREE WATER SURFACE (FWS) [vol. 17, NO. 20, 2002, Pages 46-49]
  • Hassanpour Matthi Kalaee, M. WELD-INDUCED RESIDUAL STRESSES BASEED ON SOLIDITY OF MOVING MOLTEN [vol. 17, No . 19, 2001, Pages 11-16]
  • Hoshmand, M. EVALUATION OF FLEXIBLE MANUFACTURING SYSTEMS: USING NON-MONETARY GROUP DECISION MAKING [vol. 17, No . 19, 2001, Pages 70-80]
  • Hoshyari, B. WATER CRISIS ANALYSIS WITH A GLANCE AT THE ENVIRONMENTAL IMPACT ASSESSMENT AND WATERSHED MANAGEMENT IN IRAN [vol. 17, No . 19, 2001, Pages 22-32]

K

  • Khodayari, M. S. A PREDICTIVE PATTERN FOR IRON AND STEEL PRODUCTION IN IRAN [vol. 17, No . 19, 2001, Pages 57-64]
  • Khorsand, H. EFFECT OF THERMAL CYCLING ON TRANSFORMATION TEMPERATURES IN 69/85wt%CU27/08wt%ZN2/29wt%A10/05TI MEMORY ALLOY [vol. 17, No . 19, 2001, Pages 44-49]
  • Kianfar, F. INPUT-QUTPUT RELATIONS BETWEEN VARIOUS SECTORS OF THE ECONOMY [vol. 17, No . 19, 2001, Pages 65-69]

M

  • Mahdavi Amiri, N. MULTIRESOLUTION OF SURFACES WITH ARBITRARY TOPOLOGIES USING A REVERSE DOO SUBDIVISION SCHEME [vol. 17, NO. 20, 2002, Pages 70-77]
  • Mehri, B. NUMERICAL SOLUTION OF LINEAR AND NON-LINER POISSON S EQUATION [vol. 17, NO. 20, 2002, Pages 62-69]
  • Mofid, M. DYNAMIC NON-LINEAR ANALYSIS OF CONCRETE STRUCTURES WITH STEEL BRACING [vol. 17, No . 19, 2001, Pages 33-43]
  • Moslehi Moslehabadi, P. CHARACTERISTICS AND APPLICATION OF BIOSURFACTANTS [vol. 17, NO. 20, 2002, Pages 50-53]

N

  • Nangir, A. EFFECT OF THERMAL CYCLING ON TRANSFORMATION TEMPERATURES IN 69/85wt%CU27/08wt%ZN2/29wt%A10/05TI MEMORY ALLOY [vol. 17, No . 19, 2001, Pages 44-49]
  • Nazari Alavi, A. COLOR REMOVAL OF MOLASSE EFFLUENT BY WETLAND WITH FREE WATER SURFACE (FWS) [vol. 17, NO. 20, 2002, Pages 46-49]
  • Nosier, A. INTERLAMINAR STRESS ANALYSIS IN A ROTATING COMPOSITE BEAM [vol. 17, NO. 20, 2002, Pages 24-31]

P

  • Pozash, N. A FEASIBILITY STUDY TO SUPPLY DISTRIBUTED LOADS ALONG HIGH VOLTAGE TRANSMISSION LINE [vol. 17, NO. 20, 2002, Pages 3-7]

R

  • Ranjbar, A.M. FAULT LOCATION IN POWER TRANSMISSION LINES (FREQUENCY DEPENDENT LINE PARAMETERS MODEL) [vol. 17, NO. 20, 2002, Pages 16-23]

S

  • Sadati, N. GENETIC APPROACH TO POLE PLACEMENT BY STATIC OUTPUT FEEDBACK [vol. 17, NO. 20, 2002, Pages 8-15]
  • Sadeghazr, M. MODELING OF DESIGN DETAILS IN THE FINITE ELEMENT ANALYSIS OF SLAB-BEAM STRUCTURES [vol. 17, No . 19, 2001, Pages 17-21]
  • Sadeh, J. FAULT LOCATION IN POWER TRANSMISSION LINES (FREQUENCY DEPENDENT LINE PARAMETERS MODEL) [vol. 17, NO. 20, 2002, Pages 16-23]
  • Sadrnezhaad, S. Kh. EFFECT OF THERMAL CYCLING ON TRANSFORMATION TEMPERATURES IN 69/85wt%CU27/08wt%ZN2/29wt%A10/05TI MEMORY ALLOY [vol. 17, No . 19, 2001, Pages 44-49]
  • Shah Beik, Sh. DYNAMIC NON-LINEAR ANALYSIS OF CONCRETE STRUCTURES WITH STEEL BRACING [vol. 17, No . 19, 2001, Pages 33-43]
  • Soltani, M. R. AN EXPERIMENTAL STUDY OF THE WORTEX STRUCTURE OVER DELTA WINGS [vol. 17, No . 19, 2001, Pages 3-10]

T

  • Tahani, M. INTERLAMINAR STRESS ANALYSIS IN A ROTATING COMPOSITE BEAM [vol. 17, NO. 20, 2002, Pages 24-31]
  • Taktaz, N. A PREDICTIVE PATTERN FOR IRON AND STEEL PRODUCTION IN IRAN [vol. 17, No . 19, 2001, Pages 57-64]
  • Taleb Bidokhti, Nasser WATER CRISIS ANALYSIS WITH A GLANCE AT THE ENVIRONMENTAL IMPACT ASSESSMENT AND WATERSHED MANAGEMENT IN IRAN [vol. 17, No . 19, 2001, Pages 22-32]
  • Tarahomjou, SH. CHARACTERISTICS AND APPLICATION OF BIOSURFACTANTS [vol. 17, NO. 20, 2002, Pages 50-53]
  • Tohidi, N. A PREDICTIVE PATTERN FOR IRON AND STEEL PRODUCTION IN IRAN [vol. 17, No . 19, 2001, Pages 57-64]

V

  • V.GHazvini, H. SYSTEMATIC APPROACH FOR ANALYSIS OF UNIVERSITY-INDUSTRY RELATION IN IRAN [vol. 17, NO. 20, 2002, Pages 54-61]